Questions & Answers for: inside maytag dryer three fins

...wing inside the drayer drum fell Plastic wing inside the drum dryer fell (Atlantis dryer). A smell of burn was for few minutes and disappeared. Replace the fin if you have found that it is

...inside of the dryer-? any help would be appreciated. most maytag dryers have push type clips that hold the top to the front. look between the top and front with a light and find them about 3-4 inches ...

...inside dryer is coming loose One of the three paddles inside the dryer is coming loose. I want to fix this myself, but need to know how to get to those screws, please. You will need to take the back ...

DRYER remove the top and remove the front panel look for the screw(s) that fell out at the inside under the drum use a flashlight and a magnetic pick up tool screw the baffle back in replace front and

My inside fin fell off I need to know how to open the dryer. does the top lift up or do i have to open it from the back? remove front cover1st then you can access screws to remove top cover

...Maytag 3000 series dryer, coins are stuck inside one of the dryer fin. How do I remove the fin to get the coins out. open the top of the dryer. slide the belt down to the power unit. of course you ...

inside of the dryer. Now the dryer is losing heat where the installation holes are located. Can I purchase new fins and install them so the dryer will perform like it is supposed to??? if you open the

inside the dryer and one of them is now lost. Who can I contact to purchase a new one with the installation screws??? The fins are called "Baffles" and you can find the parts at the link below: http:/

...inside the dryer (about 18" The plastic piece inside the dryer (about 18" long) came unscrewed and I can't figure out how to get the back off to get the screws that fell inside the bottom of the ...

...dryer fins fell off how to get it back on Look inside the drum at the place where the fin was on the drum. Do you see any screw holes now showing? That will tell you that you need to take the machine ...