Questions & Answers for: ink light stays turn printer

...light is Red ? Ink Button? Open the printer cover then press and release the ink button, printhead will move to the center in which there is an ink out indicator pointing to one of the ink, press and ...

...ink light. When that light is blinking, try this. Turn on the printer. Open the front cover and look at the carrier for the ink cartridges. There is a white arrow right above the latch for the color ...

...INK button. The ON light flashes and the printer makes noise. Charging takes about 30 seconds. When it's finished, the ON light stops flashing and stays on steady. CAUTION: Never turn off the printer ...

...The green power light flashes and the printer makes noise. charge takes about a minutes. When it's finished, the green power light stops flashing and stay on, and the red ink light should go

...ink light in on but not flashing i replaced all inks still red light is on can you help? i have been using a compatable in for the epson for over two years now and have not changed the suppyer and ...

...ink light stays on even after replacing it with two different cartridges. Any suggestions? Thanks, Eric I had the same problem with the light black and light magenta as well. It took trying only one ...

...ink cartridge light stays on. Can not print. I turn on my printer and as it checks everything is ok the yellow and cyan light comes on and stays on. All ink cartridges are full. The printer will not ...

...ink light stays red. The printer doesn't grab paper and run it through. Sometimes the maintenance button flashes at the same speed the ink light flashes. I have never had a problem with this printer. ...

...ink light will go out. If you do not get this desired outcome try Cleaning the Print Head, page 73 of the User Guide. Hold down the ink button when the red light is off for 3 seconds. Run a nozzle ...

ink light staying on and on button light is blinking. what do i do to make it work? ...if your ink cartridge is functional, everything should work...re-seat ink cartridge(s), turn off and then back on