Questions & Answers for: inglis front load washer drain

...load washer just gave way on its belt (it stopped working and smelled like burning rubber so I took off the front panel to find the belt severed & burned). Motor itself and all 3 pulleys looked to be ...

Ad

Question about EW1000i Front Load Washer

1 Answer

Inglis Admiralwashing machine won't drain It's like it won;t switch gears from the any cycle to drain. If you are sure that you have absolutely no water being pumped at all (Put the waste pipe in the ...

Ad

...Inglis Super Capacity Plus washing machine leaks at front at the beginning of a load then it stops. It just started doing this 2 wks ago. 1. Find out where the leak is coming from. Does it leak ...

...load models. It is activated by a plastic piece on the lid (called a "Lid Strike") through a small hole on the rim of the wash tub opening. In many cases the lid strike breaks off the lid, or the lid ...

Question about KHWS02RMT 3.7 Cu. Ft. Ensemble Front-Load Washer

1 Answer

...washer remove screws under lower panel down by feet, above pedistal (if you have one) look for large hose coming out of bottom of tub there is a handle on the filter it unscrews, if you have it on a ...

Question about TKL9260 Front Load Washer

1 Answer

...Inglis washer fills and drain at the same time. It can fills for hours without stopping. Do I need a service call or can I do something to fix it? make sure your drain hose is up off the floor. it ...

Question about WFW8400TB Front Load Washer

1 Answer

front loader from Lowes it is a whirlpool I didnt recieve ant papper work nor books with it so im kind of in the dark . I keep gett ing codes that come up in the time remaining window like F-21 etc. i

Question about Inglis IP4400 Washer

1 Answer

...Inglis dead Washer dies mid-cycle last night. Full of water and clothes. In top load washers, if the machine goes through the cycles and then just stops at the spin cycle and leaves you with no noise ...

Question about WF337AA Front Load Washer

1 Answer

...front load washer model WF337AAG/XAA stops at the spin cycle. It won't drain, and I get a ND error code. I've made sure the hose to the standpipe is clear and unkinked. I drained the ...

...Inglis front load washer that will wash and rinse then it starts to spin stops and then I have to start the spin over Inglis front load mod 1fw7200tw It will wash drain and rinse drain.then start to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...