Questions & Answers for: ingenium

How do you get the top plastic cap off the Kohler Ingenium flush tower without breaking it? I need to adjust the flow as the toilet runs constantly and the water level is way to high. My Kohler ...

toilet fill runs periodically works well but wastes water Kohler 2 piece with Ingenium fill valve. Installed about one year. Recently noticed water running every 10 minutes or so. It stops after a few

toilet keeps running even when manually lifting floater to max this is an Ingenium type flusher check handle to ensure no tension is on the flapper chain when not being flushed. check flapper to ...

slow refilling - how to inpect the ngenium fill valve for blockage or ajust? I would diconnect the fill line and see if the rubber washer is ****-eyed.

toilet runs to long be fore stopping low water pressure

...just inside of tank or only by the flexible fill hose connected to top of float? this is a koehler ingenium system. my tank is constantly filling and overflowing into the excess drain tube yes both, ...

...is full What kind of flush valve is it? kohler.com shows a couple of different towers with their ingenium toilets. Is it a Kohler item or is it a Fluidmaster? Usually you adjust water height by ...

Ingenium toilet water will not turn off. The float is completely under water and still water is coming into the tank. WEll, two thoughts come to mind. either your float has "sunk" or you have foreign ...

Kohler toilet troubles I have a Kohler Ingenium toilet whose flush is insufficient. Not enough force is generated to remove waste from the bowl, the bowl fills up too high and runs after the bowl has ...

...flush valve assembly black plastic with overflow, outlet and flush opening http://www.ca.kohler.com/ingenium/ingenium_in_action.jsp advertising video https://www.youtube.com/watch?v=p7z05FXk2k0 and ...