Questions & Answers for: indesit washing machine shock absorbers

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

...machine does complete its cycle but the washing is soaking wet. Can it be fixed? Open up behind, check to see if any spring/springs have come off. Check to see if one or more of the shock absorbers ...

Ad

Question about GLTF2940ES Front Load Washer

2 Answers

INDESIT WD 12S MITS MAKING A BANGING NOISE,ALSO WATER IS COMING OUT OF THE BOTTOM.COULD IT BE THE DOOR SEAL. The banging is most likely caused by failing shock absorbers ( there are two plastic shock ...

Ad

...of washing machines any advice much apprieciated. the model is indesit wixl126 Loose mounting points or broken pins. If not that then possibly drum shaft could be cracked. check the shock ...

Question about W 123 Front Load Washer

2 Answers

...washing machine INDESIT WI 40.IT'S MAKE A LOUD NOICE AND JUMPING WHEN IT IS RUNNING FAST IN THE END OF THE WASHING. IT seems that the wash drum is hitting on the exterior body possibly the shock ...

Question about W 123 Front Load Washer

1 Answer

...washing machine indesit wia 121 uk but there are two types both look the same and i have no part no's on my old ones how can i tell? is there a differance? thanks Hi from retired Englishman in SW ...

...washing machine sound like its going to take off and bounce along the floor when its on ths spin cycle It is the dampers on the underside of the drum that have failed. There are normally 2 dampers. ...

Question about W 123 Front Load Washer

1 Answer

machine & open up the back. One of the shock-absorbers could be loose, tighten it up with spanner. Check the shock-absorbers (dampers) by noting the position, bolts, etc and then remove them. They

Question about W 123 Front Load Washer

1 Answer

...indesit washing machine wa135 makes extremely loud noise when spining There are a couple of things that might explain this 1. The drum is suspended from 2 heavy duty springs that clip to the top of ...

...machine to look at the shock absorbers and springs. Springs look fine and so do the shock absorbers, they just seem to have a lot of play in them. How firm should they be? The shocks should be firm ...

absorbers for the cts MAX FITNESS rowing machine shock absorber resistance rowing machine not by looking under washing machines for sure .try the manufacturer or possibly thru the place you bought it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...