Questions & Answers for: indesit door catch

Ad

Question about 24 in. D61 Free-standing Dishwasher

1 Answer

Door catch plate Indesit d61 I have ordered a new Merloni door catch plate as the original has snapped and wondered if someone could tell me how to replace it please. The cost of fitting a £4.00 door ...

Ad

Question about 23 in. DV62 IX Built-in Dishwasher

1 Answer

door catch not sprung back door will not close as catch hasn't sprung back when door was opened. how can i fix this. should be able to flick it out with a screw driver...sounds like part of the catch ...

Ad

Question about 23 in. DV62 IX Built-in Dishwasher

2 Answers

...Indesit front loaders ( apart from replacing the door interlock switch) is If the door will not close and click in the lock, then take the door off with a tork screwdriver and take the screws of the ...

Question about 18 in. D41 Slim-Line Free-standing Dishwasher

1 Answer

...indesit slimline dishwasher door won't shut , fills like it isn't catching onto the latch even though the latch looks ok. There are defiantly not any obstructions had a good clean around seal ....... ...

Question about W 123 Front Load Washer

1 Answer

...indesit washer has door locked light flashing and wont run wash the door lock light flashing indicates that the door has not locked or not shut correctly,is the appliance is under 5 yrs old open the ...

Question about W 123 Front Load Washer

2 Answers

indesit w1101 door catch broken wont lock can I fix it myself?? E mail me model and seriel NO. we can supply [email protected] If the catch is broken on the inside so the metal bit is in tact but ...

Question about W 123 Front Load Washer

1 Answer

...indesit wd12x been fine now the door wont open and the handle is really loose and very ready to go ran programmes to clear no joy could be the catch has broken you may have to force it open and new ...

...door handle on my Indesit W83 just broke off and I can't open the door... Any tips for getting my clothes out?? :/ same thing happened to me with my indesit w10.....so now i have touse a screwdriver ...

Question about W 123 Front Load Washer

1 Answer

INDESIT 133 FRONT DOOR WHWEN SHUT DOES NOT CLICK. HENCE THE MACHINE DOES NOT START. CERTAIN CONTACT IS NOT ESTABLISHED. its prob your inner door catch or door striking plate the inner door catch has a

INDESIT IDL 530 DISHWASHER IF I TURN IT ON WITH THE DOOR OPEN ITS FINE ONCE I CLOSE THE DOOR IT TRIPS THE RCD HOUSE FUSE, THE DOOR CATCH WAS REPLACED AS THE OTHER ONE BROKE A FEW DAYS AGO IT TRIPPED ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18084 Answers

Cindy Wells

Level 3 Expert

6004 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...