Questions & Answers for: impellor

Ad

Question about KitchenAid Dishwashers

1 Answer

...make the high pitched noise if rusted or cracked. ------------- Motor and pump assembly screw and impellor help.... One of the most common question that I get on a dishwasher repair is "how does ...

Ad

Question about 24 in. SHU43 Built-in Dishwasher

1 Answer

...Check where drainhose connects to waste pipe for blockage. If OK, blockage likely to be in pump impellor. Disconnect from power. To access pump: Open door and remove all bottom filters. Remove

Ad

Question about 24 in. DD603H W Built-in Dishwasher

2 Answers

...I need a new motor assembly? It depends on how bad the wear is. You can trim the roughness off the impellor with a craft knife. Also check the stator impellor housing for damage as well and try to ...

Question about 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

1 Answer

...No help. The cycle stops at draining. Investigated and found small piece of glass wedged in the impellor. While having the interior cover over the impellor off, the motor for the drain impellor

Question about 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

1 Answer

...is at 5 instead of the usual 8-10. When talking to my pool repairman he suggested I make sure the impellor is not clogged or have debris obstructing it. Can you please tell me where the impellor is ...

Question about 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

1 Answer

pool pump does not turn on it just hums If it hums and the impellor shaft is not turning, it's jammed and will trip the breaker after it over heats. If the impellor shaft is turning, may have a ...

Question about 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

1 Answer

dishwasher pump impellor comes off dishwasher not pumping water out i removed and cleanded pump but found impellor blade floating i reincerted the impellor and dishwasher worked after 2 rinse cycles ...

impellor was froze so took it apart and spun it, motor now just makes a humming noise and impellor doesnt spin impellor was stuck or froze so took it apart and got it to turn with some force, stil ...

Question about "Chain Saw - 16" Bar, 3 Hp

1 Answer

...outboard tilt engine and remove all bolts that hold gearbox to leg , put box in vice and remove impellor house and remove impellor , check all holes and seals below housing for damage etc , if ...

Question about 1999-2001 Yamaha Suv 1200 Cc Jet Ski Motor Mount

1 Answer

...! if theres no propultion of water it could be several things ! 1. plastic bag etc in the intake to impellor pump assy ! 2. impellor gap to housing too much ie worn impellor ! 3. impellor not turning ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike

Level 3 Expert

4357 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Brad Brown

Level 3 Expert

18060 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...