...If your engine move either direction when you accerlerate or shift you have a bad motor mount or two. should a transmission filter seal be changed in a 2005 Impala when the filter and fluid are ...
has poping noise when taking off or backing up has apoping noise when taking off or backing up check motor mounts and subframe bushings as well as sway bar bushings
...impala its a good idea to use a jack to brace the front of engine. then you remove the front motor mount and allow the engine to come forward but stil support the engine with a jack this should allow ...
...2003 impala. And how to set the rocker arms Header install varies with brand and vehicle options. Best to get directions from the manufacturer. Some are easy, some need the motor lifted and accessory ...
...2003 3.8 impala I have a 3.8L 2002 Impala. The easiest way is to remove the front motor mounts and rock the engine forward. It can be done with a combination of extensions and swivels, but don't ...
...more than one crank shaft position sensors on my 2003 impala 3400 motor? yes their is one behind the crankshaft front pulley, and one mounted in the engine block just below the rear exhaust ...
motor mount location on 2003 impala which motor mount are you trying to locate? All of them don't know where and how many they are.
Question about 2003 Impala
...impala motor moves about 1 foot when placed into gear,what could it be? The motor mounts..the rubbing bushings always wear out on them. You can easily see the dog-bone shaped one near the center of ...
...2003 impala? motor mount has a bolt missing or the mount is broken, should fix it as the others may break if torqued to much and all kinds of lines and stuff are being stressed as well if it moves ...
What can make a 2003 chevy impala cut off and makes the motor jump motor mount
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions