1991 dodge ram 250 van 318 engine won't start replaced battery,cables,starter,relay switch,ignition switch,nothing,but click,click,click.whats wrong here? ALWAYS CHECK THE GROUND ON A DODGE ground ...
1991 dodge dakota wont start turns over turns over but no spark new distributer and spark plugs new to could it be a problem with the ground connections ignition control module possibly?
...over with no spark or fire. The ignition control module may have failed. Unfortunetly the only way to have that one tested is to take it to a shop. The module is sold with the distributor
...ignition control module will look like. You may want to start looking underneath the dash. Please click here ...
...ignition control module located on a 91 dodge ram pick up truck with a 5.2 engin Part of the PCM/Computer,I know they had a different name for that, on a chrysler product,not separate item you can ...
...ignition control module located on a 1991 dodge stealth single cam There is no ignition control module. The ignition timing is controled by the on board computer by monitoring the Crank Angle Sensor. ...
where is the ignition control module located on a 1991 dodge w250 truck? I thought it was on the firewall and cannot locate it anywhere. Thanks check under distribitor cap
where is the ignition control module located on a 1991 Dodge Dakota? Hello The ignition control module is part of the ECM engine computer which is located under the hood.
...off and wont start,let it set for 30 mins. and it will start. The ignition module is part of the engine computer. The pickup module in the distributor could be the problem. Could be a faulty coil
...ignition control module on a 2001 dodge dakota Ignition control is effected by the PCM (powertrain control module). On the 3.9L V6 and 5.9L V8 engine, there is a module in the distributor that sends ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions