No picture when I turn the set on I get two series of four clicks, no picture or sound. Please help. thanks, MIke Possible IFT. or Horiz. drive circuit problem. Philips are noted for that.
...the tv. Many thanks Without a Make or model it's hard to say, but I would have to say it's the IFT which is the High Voltage Transformer. Sony's are noted for bad IFT's. if your not a tech I ...
PT5598HDI There is sound but not picture. There is no high voltage and the voltages around the IFT are way off. More likely Icz103 & Icz104 the convergence amps. Are they heating at all? Bill
i was boosting off a 2005 sportster and now ift blows ing. and speedo fuse what do i check You voltage regulaor is most likely shot.
Question about R52WH73 Projection Television
...fuse twice for convergence what esle do i need to change? You need to resolder all the pins on the IFT ( HV Transformer ). Common problem with that model. While your at it, look the entire
can you check a alterntor on a 1993 ford tarus by taking one of he cable off the battery ift still runs is it charging no but u can fry the ecm......test with voltage meter ....13.5 volt at most
Question about 1993 Taurus
What would cause the Ift Drive Module 110 v fan not to work on a 932i treadmill? power is going through power cord-circuit breaker-filter-100 ohm resistor...what component in the lower PCA activates ...
plug play manager if any drivers are not working uninstall ift download the proper driver from dell website and install it.
the speed on my Precor 932i won't adjust any faster than 1 HI There, Did you get this worked out? Possibly the IFT drive?
Question about 956i Experience Series Treadmill (Used)
...between the upper and lower electronics. This particular failure is a direct result of a failed IFT drive module, or the lower drive "box" that is made by Advanced Drive Technology. The brains of ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions