...low oil pressure (check oil level & condition- should be full and clean), could be the oil pressure sending unit going bad, could be electrical (short) in the oil pressure sending unit wire ...
...XG300 P0115, P1159, P1191, P1193, P0115 The car had a total of six codes of which have been listed above in this description. The definitions of the codes according to the code reader were the ...
...xg300 got a code p1191 and p1193,what is the fuel air metering? this is the difinition from the Hyundai manual P1191 ETS Limp Home Valve On P1193 ETS Limp Home - Low Rpm You have a problem with the ...
what is the proper air pressure for the low side port of the air conditioning system in a hyundai xg300? 32 psi to about 37 psi at idle.
...Hyundai XG300 threw the P0171 and P0174 codes a couple weeks ago. While driving it myself, I noticed that the idle RPM was getting fairly low at time. After looking online about these, I was about to ...
...Hyundai XG300 threw the P0171 and P0174 codes a couple weeks ago. While driving it myself, I noticed that the idle RPM was getting fairly low at time. After looking online about these, I was about to ...
My vehicle stopped dead at set of lights and would not start, called RACQ he installed new battery $165 Stated that was problem, drove less than 1/2 kilometre down road, felt the vehicle ****. ...
...was good to go but nope up popped the p1193 low revolution my dad told me clean the throttle body clear codes and let idle for awhile so computer finds idle took the car for a spin and performs ...
Low Idle (750RPM) and shuts off when coming to a complete stop Recently I have had my MAF sensor replaced (Cleaning it didn't do anything) after my car started going into limp mode. After replacing it
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
