Questions & Answers for: hyundai timing belt gear

the timing belt markings for a 2002 Hyundai Elantra? Mark are on the crank and cam timing gears. Cam gear mark at 12 o"clock crank gear mark lined up with TGC mark on block when installing timing belt

...timing belt on 2001 hyundai tiburom It is a 2.0L (the delta blocks weren't in tibs until '03). You have to remove the timing belt tensioner, and then you can remove the bolts for the water pump. I ...

...timing belt snaped on a hyundai lantra 1998 the valves aint bent how do i get both crank@cam in the right spot for the timing so i can putnew belt on thank u im sure the valves are bent unless you ...

...hyundai the timing belt will have to be removed so the crank gear can come off the sensor is usually behind the gear especially if it is a 6cyl if it is a 4 cyl then the wire goes behind the timing ...

...timing marks,engine will not start but turns over. Hyundai Terracan 2002 hi from uk assume you have renewed c/belt and balance shaft timing belt? if so? and sure your timing marks on cams and the ...

...timing belt to a 2004 Hyundai Elantra XD GL. If you are not very mechanically inclined, timing belt removal and replacement is best left to a professional because misplacement of the crank and cam ...

...timing belt in1996 hyundai elantra major problems related to timing belts Timing belts do wear out - they flex and bend literally millions of times while they last.If you are having problems with ...

...timing sensor, which damages it and results in its failure. This wearing of the gear is by design and Hyundai should be taken to task for this. The crankshaft does not have a key between it and the ...

...timing belt didnt move any thing will it still be in time hyundai excel 1998 you need to make sure it is on top dead center on the crank gear, then align the marks on the cam gear check this by ...

...hyundai tucson is making quite a loud rattling sound at low revs but disappears around 2500 revs. it's worse in high gears I've had the gear change weight setup changed as bracket was corroded and ...