...hyundai santa fe i`m trying to remove the cv axle on a 2003 hyundai 3.5. it is the pass side front axle it is ready to come out except it will not release from the diff/trans. how do i go about ...
hyundai santa fe. when i removed the old axle i had to drive it off it was so tight. now when i try to install the new one it will slide off by hand on the inboard side. is this normal? i have already
...Hyundai Santa Fe 4wd with a v6, 2.7 with a check engine light on. The code P0501 vehicle speed sensor A range/ performance is the code that Iam getting, how do I fix/test the sensor ?????? I found an ...
santa fe,is it possable to remove the engine up and out once the radiator is out and axles disconnected the only way is up and out.its also easier if you take off the front cross panel in front of the
...Santa Fe. I am trying to pull the front left hub off using a puller (3 jaw). The puller is pushing the axel back. I called the local dealer. The Mechanic said I have to take the axel off. This is ...
...front hub off to get out the Manuel doesn't give enough info, have done cv's on other cars an had no prob's, was looking for a cir clip but don't see one You need to detach the ball ...
front boots are leaking ront axle boots leaking. pulled left side rather easy, having prolems with right side They make a puller that removes the CV joint from the axle the c-clip gets stuck making it
how to remove the axle assembly on a 02 santa fe front or rear?
...axle Same as the front on most vehicles There are pictures on the internet & has to be video on You Tube If you can break suspension loose & do ball joints or pull any cv axle, you can do ...
santa fe lift front of vehicle secure jack stands remove right front wheel strut mount bolts ,outer tie rod end ,remove speed sensor for movement of spindle remove axle nut swing spindle away and feed
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
