Questions & Answers for: hyundai gear selector problems

...gear: Gear selector cable has failed Brake lock solenoid has failed not allowing the gear selector to move out of "Park" Excessively low transmission fluid (note: if car is operated for an extended ...

gear link selector has either worn or broken. it is probably best to see a mechanic to fix this problem as i had similar problem in a 98 accent saloon, and found this very difficult to do myself. hope

...Hyundai Accent will not shift gears. The shifter is loose to move. We checked the cables and they are attached the linkage but it is not engaging the gears. Can you help me with this problem? hi from ...

HI, When my car is off, the gear handle shifts absolutely smooth. the problembegins when I turn on the car ... the gear handle gets absolutely jammed. Kindly advise. Possible that the CLUTCH settings ...

...Hyundai Elantra. It's shifting hard all of the sudden from 1st to 2nd and 2nd to 3rd for the first 5 min of the driving day. It hadn't thrown any codes or ck engine light and dealer can't ...

...Hyundai Tucson manual - reverse stop plate not limiting gear stick movement. When you try and select 1 st gear the stick travels all the way to the left and you get reverse gear. Any suggestions? IN ...

...by the brake pedal. You should hear a click by the gear selector when you step on the brake pedal. If you don't hear the click then you probably have a cut wire that goes to the brake safety ...

I cannot get 2 4 and reverse gears on my hyundai accent 02 plate but car has only done 46k check for a gear selector cable problem or an adjustment problem

Hi my Hyundai atos gls 2008 model is giving me problems whenever i put it on gear 5 it goes back to neutral .what could be the problem ? Could be worn or misaligned selectors.

...Hyundai Accent Keeps telling me to go to a gear when I am in that gear does anyone know what the problem might be? I will be driving in 6th gear for a while and it will pop up saying go to 6th gear ...