Questions & Answers for: hyundai accent 1 timing marks

...Hyundai Accent with Engine skip...error code P0300 P0301 This problem has gotten progressively worst over the past few months. At first I would only notice it when accelerating on the highway where ...

Ad

...Accent, my cam could be off by 1 tooth. if my cam is off by 1 tooth, how can I tell? How do I fix it? Pull the upper cover off, set the engine at top dead center and see if you cams line up to the ...

Ad

...Hyundai Accent the timing marks are as follows... the camshaft gear mark will be roughly in the 4 o clock position... the mark on the gear needs to line up with a small pointer on the rear cover. the ...

...timing belt for a 2000 accet on the camshaft hi from uk the camshaft cog has a small hole drillinh between the outer toothed and central securing bolt at TDC number 1 cyl this hole must be at top of ...

Question about 2001 Accent

2 Answers

...performance and more milesin future hope this helps 2001 Hyundai Accent 1.5L sohc or 1.6 dohc both are interference engine's, will bent valve's. Head will need to come out and replace bent

hyundai accent DL sedan. my tension pulley 2002 hyundai accent GL sedan. my tension pulley broke and i replaced it as well as all the belts, since i was removing them anyways. there are two blue marks

accent and it wont start i lined up the timing marks and even turned it one full turn after that and it still dont start turns very freely lots of possibilities. sounds like you may be out 180 degrees

...timing marks are, dot on camshaft pulley and mark on cylinder head at approx 4 o'clock, crankshaft marks are dot on crankshaft pulley and dot on engine at approx 1 o'clock hpoe this helps Regards ...

Question about 1999 Accent

2 Answers

hyundai accent 1.5 sohc 4 cyl Here is a picture There are no free sites that I know of to get this. Your best bet is to get a Haynes or Chilton's manual on your vehicle so you have instructions on how

Question about 1999 Accent

1 Answer

...accent 1.6 The timing marks allow the engine to be correctly timed . It depends on what you are trying to do . If you are just trying to time the engine with a timing light .Then the mark that you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...