...HEAD GASKET 2003 1.Clean both gasket surfaces of the cylinder block and cylinder head. 2.Verify the identification marks on the cylinder head gasket. 3.Install the gasket so that the surface with the ...
...to the manual its 22NM or 16lb/ft I need the head bolt torque specs. on a 2001 hyundai accent 1.5 liter engine. Thank You. Ron can you help me with the flywheel bolt torque settings for chana 1300 ...
...hyundai accent gl for the head bolts For 3.0L engines, tighten head bolts in sequence to 76-83 ft. lbs. (105-115 Nm). For 2.5L engines, tighten the bolts in sequence as follows: Step 1: 18 ft. lbs. ...
torque specs.for hyundai accent? need to torque head to engine block step 1 26 ft lbs. step 2 additional 90 degrees step 3 loosen all bolts one full turn step 4 26 ft lbs. step 5 additional 90 degrees
...hyundai lantra cylinder head torque spec Revised Bulletin This TSB supersedes the Cylinder Head Bolt Torque Specifications previously described in TSB # 96-20-003, TSB # 96-20-003-1 and TSB # ...
...head bolts step 1 14 ft lbs. step 2 an additional 90 degrees step 3 another 90 degrees with new head bolts step 1 46 ft lbs. step 2 loosen all bolts step 3 14 ft lbs. step 4 an additinaol 90 degrees ...
...hyundai lantra j5. Could you email me back on [email protected]. Thanks let me see if i can get some info 4 you. edit REMOVAL 1. Drain the coolant and disconnect the upper radiator hose. 2. ...
2001 hyundai elantra head bolt head torque specs 18-22 lbs step 1 .....step 2 60degree turn ...........step 3 60 degree turn I don't get what u mean by the 3 steps for the head bolts
Question about 1997 Accent
...Hyundai Accent GLS G4EH 1.3L I need to replace the rocker cover gasket on my 1997 Hyundai Accent GLS (engine code G4EH, 1.3L). Can anyone kindly provide me with torque specs for re-tightening the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
