...slipping especially going up hills or slopes. MIKE You didn't indicate what model so I don't know if it is hydrostatic drive or not. If it is not hydrostatic drive, it is most likely a worn belt or ...
...slipping. How do I know if the hydrostatic drive is going bad. Hello, My name is Dane and I'm going to help you with your problem. First, I believe those craftsman units are sealed and there's no way ...
Question about Riding Lawn Mower Yth24v48ls 48 Inch Cut
slipping slips after mowing for about 30 min, after 1 hour cool down/rest works fine until 30 min or so first i would check the belt tension also check the belt for oil is so look for the cause of the
Question about Riding Lawn Mower Yth24v48ls 48 Inch Cut
#39;m going forward? What do I need to adjust? Thanks! Sounds like your transmission is shot if its a geared mower. If its a belt driven hydrostatic mower the belt is slipping and needs to be replaced
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...hydrostat which would be big bucks. I had a JD that did that and a new belt fixed it up for a while. Then the hydrostatic transmission started wearing out quickly. You just have to lift up the front ...
Question about 20 hp 42 in. Deck Lawn Tractor - CA Model
...hydraulic filter motor was rebuilt year ago why im i lose power in transmission? ? If this is a hydrostatic transmission on a lawnmower type garden tractor some power loss is expected. That just ...
...belt broken or slipped of pulleys, hydrostatic drive filter(s) plugged. Should be one or those, Roger. Follow the drivebelt with your hand (disconnect battery to be safe) and see if it hasn't slipped ...
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
My hydrostatic pedal does not move the tractor in either direction There is at least one belt that goes from the engine to the hydrostatic drive. It is highly likely that this belt has slipped off a ...
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
...Hydrostat, I automatically think lawn tractop. If this is correct, then the reason it is slipping and just won't go is that your main drive belt is worn and slipping and won't pull. Replace the main ...
Question about Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
...drive belt slipping? It may be hydrostatic but there's generally a drive belt off the engine to drive the pump in the rear end. Check your hydraulic fluid and try changing it and filter if
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions
