Questions & Answers for: husqvarna chainsaw oiler

Husqvarna chainsaw 440e - enough chain lube? Husqvarna chainsaw 440e - using less than half a tank of chain lube to a tank of fuel - is this enough chain lube delivery? That seems low to me. Page 15 ...

...Husqvarna Chainsaw isn't working and I was wondering where the best place to buy a replacement oiler would be. There is very little to go wrong with the pump, it is more likly a blockage, remove the ...

husqvarna chainsaw Not all 345 machines had an adjustable oiler, it is retro fittable if it does not, however if it hs an adjuster, the screw is located on the bottom of the saw between the cranckcase

...oiler on 455 husqvarna I'm sorry, but I'm not aware of any adjustments that can be made to the oiler.  Just make sure the ports are clean so that the oiler doesn't get clogged and ...

oil leaks from the bar oiler when not inuse on Husqvarna 268 Oil leaks from chain bar oiler Try THICKER oil like straight 30 weight

...OILER ON THE 240 HUSQVARNA I USUALLY HAVE THE OILER TO RUN OUT OF OIL WHEN IT RUN OUT OF FUEL. BUT WITH THIS SAW I RUN OUT OF OIL BEFORE THE FUEL. I DONT HAVE A MANUAL TO SHOW ME WHERE AND HOW TO ...

Husqvarna 350 oiler swap ? Can you install the 350 automatic oiler in the Husky 240 Chainsaw Not as far as i know, ive checked both parts manuals and they both have two different part numbers which ...

Can you install a Husqvarna 350 adjustable oiler in the Husky 240 ? No, the oiler from the 350 will not fit the 240.

youtube how do i repair the oiler? first inspect the worm drive gear that makes the oiler work. this is located behind the clutch and drum. also inspect the bar oiler holes for blockage.

how do i adjust the oiler on a husqvarna 51 no oiler screw It is a non-adjustable pump so you can not make adjustments to it.