Questions & Answers for: husqvarna chainsaw chain release

Husqvarna chain brake Installed new chain blade on Husqvaran 51 and forgot to release chain brake. Can't put back cover because the brake tension won't allow it to fit over brake You'll have to ...

chainsaw cant get the cover back on chain saw The chain brake should have been released before removing the cover. You will have to release it with a large flat-blade screwdriver in the connector that

...release it with a flat screwdriver. you should see something that looks like a wheel where the chain brake locks to the brake handle when you put the cover back on. you should be able to twist that ...

husqvarna 460 rancher saw- chain brake is tripped and locked; cannot replace cover How do I reset the chain brake? Pull back on the chain brake, this will release it.

...Husqvarna 136 / 141 model chainsaw - it has been idle for several months. After starting and allowing to warm up for a minute or two and then attempting to use it - when applying full throtle the ...

husqvarna 450 rancher chainsaw locked only used saw for 30 minutes; chain locked. Oil half full; I took apart cleaned but still when put chain back on it is locked, can't move it. tried releasing ...

...Husqvarna 240e and can't get the cover off to replace the chain. Got it loose but there appears to be a something holding it on. Pull the chain brake handle back to release the tension off the ...

...Husqvarna 14" e235 chainsaw (to affect replacement of defective primer bulb) after removing 3 visible screws, the cover seems not to be free. I note a recessed screw head below the bulb.. does that ...

Husqvarna 142 chainsaw. The saw will idle, however when I depress the throttle the saw chokes down a dies. What condition is your spark plug in?Is your filter clean?Is your gas-oil mixture correct? Is