Questions & Answers for: husqvarna chainsaw chain comes loose

...husqvarna 350 chainsaw, which is about one year old. I found what looks like a pin that is a little flared out in the center, loose in the starter section of the saw, but also may have come from the ...

Ad

Question about "Chain Saw - 16" Bar, 3 Hp

1 Answer

husqvarna 240e muffler comes loose even with locktite and rebored holes. what can I do? hi you can try using anti vibration washers, these are the type that have allot of little cutouts in them they ...

Ad

Question about "Chain Saw - 16" Bar, 3 Hp

1 Answer

Chainsaw Chain Keeps Coming Loose I bought a brand new husky saw 235 and the chain keeps coming loose its about an inch under the bar after bucks up 3-5 logs in a row, the oiler is working but im not ...

Question about Chain Saw 20" Bar

1 Answer

...Husqvarna 350, then there was an issue with the muffler coming loose, there was a retro fit muffler with a third fixing screw available, if the muffler comes loose there is a chance that it will melt ...

Question about Chain Saw 20" Bar

1 Answer

...Husqvarna 240e and can't get the cover off to replace the chain. Got it loose but there appears to be a something holding it on. Pull the chain brake handle back to release the tension off the ...

Question about , No.455 Rancher, 20" Gas - Powered Chainsaw

1 Answer

...chainsaw husky 20inch bar chain keeps coming off new chain You may have a bent bar, or you could be putting the chain on a little too loose. Perhaps the chain is not getting lube ? Possible that the ...

...husqvarna 435 chainsaw Chain came off the bar and I can't get it back on. If the chain gets too loose it can come off the bar, you need to loosen the two hex nuts that clamp the bar in position then ...

husqvarna 450 e chainsaw chain tension wheel doesn't lock and the cover comes off during use Following the directions for chain adjustment gets it right for a few minutes and then the wheel starts ...

Question about 450 e-series 18" Chain Saw

2 Answers

chain on my Husqvarna saw keeps coming loose dear with the passage of time it gets loose. and manufacturer always provide adjustment screw. try to find that screw and adjust it. for further assistance

husqvarna 61 vibrates badly when idling.Various things keep coming loose. Tried locktight. 2nd problem is slow to idle from full revs, sometimes won't idle, will cut out when turned chain side down. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...