Questions & Answers for: husqvarna chainsaw bar getting oil

Husqvarna chainsaw 440e - enough chain lube? Husqvarna chainsaw 440e - using less than half a tank of chain lube to a tank of fuel - is this enough chain lube delivery? That seems low to me. Page 15 ...

...bar oil on the Husqvarna 455 rancher? An ?OM, 455e Rancher, 455 Rancher, 460 Rancher, 2009-09, EN, FR, ES? Follows (may not be your saw): ...

...oil to bar bar get hot little or no oil get to bar The first thing to check is to see if the oiling hole in the bar is clear of sawdust a debris. Remove the chain and bar completely and make sure the ...

Husqvarna 235 is not oiling.Hole and groove on bar have been cleaned. The saw does drip oil with the bar off when running.All parts are clean but bar is not getting oil.Hope you can help,thanks. With ...

...bar, what would be causing it? When using the chainsaw, the chainsaw siezes, and makes the engine run sluggish. The bar and chain we not is not getting oil. The oil reservoir is fulled. Hope this is ...

...husqvarna 141 getting to answers 50:1 or 40:1 What Husqvrna say is 50-1 withe Husqvarna two stroke oil, or 40-1 with other brands of two stroke oil, this is due to not knowing the quaility of other ...

bar oil does it take so i get the right one  Most Husqvarna chainsaws recommend using their brand of oil, which is a vegetable based oil product. If you do not have access to it, use standard bar

husqvarna 55 rancher seems to leak bar oil all over everything except the chain. bar is clean but oil dosent seem to get to the chain bar oil leaks or urns all over but dont seem to get on chain. ooil

will not feed oil to the chain bar Sometimes the oil passages in the bar get pluged up and block the oil. Take the bar off the saw and clean out all the holes.

chainsaw chain keeps getting tighter when using? this is a sure sign of chain overheating , due to not enough oil to bar , this will eventually cause bar to wear down and chain to not stay on ck your ...