Questions & Answers for: husqvarna 455 oiler working

...455 Rancher got it slightly used. It had oiler issues when I got it took it to the shop they installed a new one 3 months later the oiler isn't working,any fix for this? the rancher uses a plastic ...

...husqvarna 455 rancher, just cleaned it, so it's not from debris. What else can I try before I take it to the dealer? The chain oil pump must be worn. The pump is fitted behiend the clutch and chain ...

...455 rancher and the 460 are basically the same saw. On my 460 there was a black plastic gear driven by the sprocket that drives the oil pump. The teeth on the gear were mangled. The part was about $4 ...

455 rancher will not oil, replaced complete oiler, chain saw will not oil,have replaced complete oiler ? An IPL with oiler components and part numbers can be here: HusqvarnaUSA.com ...

455 chain saw does not seam to be oiling the chain enough,checked an cleaned oiler chain an bar ,i cant find my book but i know it can be adjusted but dont know how Caution it is probably only a 3 ...

Chain oiler don.t work took to shop 3 times same problem!!! Answered in clarification.

Husqvarna 455 Rancher - oil coming out of muffler and not oiler. Just emptied gas and remixed new batch so that should not be issue. It was working fine until I took off chain cover to clean and got ...

...Husqvarna Rancher 455 the oiler was not pumping at all. This happened after I replaced the spur sprocket with a rim sprocket. I noticed the rim sprocket doesn't have the "dogs" to drive the ...

The oiler on my 455 doesn't seem to be working properly remove and clean ports in the bar

youtube how do i repair the oiler? first inspect the worm drive gear that makes the oiler work. this is located behind the clutch and drum. also inspect the bar oiler holes for blockage.