Question about "Chain Saw - 16" Bar, 3 Hp
husky 445, runs for 10 min. then cuts out. I open husky 445, runs for 10 min. then cuts out. I open the fuel cap and it runs fine. I tried cleaning the fuel air filter but problem persists. It sounds ...
husqvarna 445, won't start From post by someone else: Did everything exactly as directed, tried a few times, including leaving alone for a while, nothing. I have the same problem with my brand new 445
...Husqvarna 445 chain saw and it does not get enough oil to the bar and chain. I have to stop saw after about 10 minutes of cutting because it freezes the chain so I remove bar and chain clean out the ...
Question about Forest & Garden #966906636 445 16" Gas Chain Saw
445 chainsaw. Was cutting all day and no problem. Good gasoline, Husqvarna 2 cycle oil. All of a sudden started racing like the carb was stuck full open even when throttle trigger released. Then would
Question about Forest & Garden #966906636 445 16" Gas Chain Saw
The saw bogs down after 10 min of cutting. Look for fuel flow problems...filters, straingers, gummed up carb, etc.
Question about Forest & Garden #966906636 445 16" Gas Chain Saw
i have 236 husqvarna.and its seems it using oil too much.nearly the same as petrol.is any adjutment on it or its something wrong??or its should be like this?? There is no adjustment on the oil pump, ...
Question about "Chain Saw - 16" Bar, 3 Hp
...Husqvarna 445 18" 45.7cc the automatic Hi i have a Husqvarna 445 18" 45.7cc the automatic oiler stop working...oil does not come out on the chain bar no more..the saw is only 2 month ...
husqvarna problems model 445 will not run idle down, runs at full speed check the linkage first...
Question about 445 18" 45.7cc Gas Powered Chain Saw X-Torq Chainsaw Orange
Husqvarna 445, starts runs and dies. as if it was a fuel problem. I have replaced the carb, fuel lines, intake pipe, crank seals, fuel filter, fuel vent. nothing has changed. You seem to have changed ...
Question about 445 18" 45.7cc Gas Powered Chain Saw X-Torq Chainsaw Orange
...Husqvarna 445 xtorq. What is wrong and how to fix? I have used lighter oil, never a problem. I had cut up 6 or 8 trees on this run when it stopped oiling. Have never let oil run dry. This saw has had ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions