Questions & Answers for: husqvarna 350 chainsaw spark plug

husqvarna 350 geting fire and gas but wont start Have you tried cleaning the air filter? The carburetor fuel inlet may have screens plugged with sawdust as well. If you have spark and fuel and AIR you

Husqvarna 350 chainsaw won't stay running. Changed spark plug and fresh gas. Please help if Fuel starvation - 'lean fuel' condition Basic things to check: 1) spark plug 2) spark arrestor in muffler 3)

...Husqvarna 350. The saw has been sittin for a year. I put new gas with the correct oil dilution and it still ,does not start. Popped the top and cleaned the spark plug..still does not start. Went to ...

350 chainsaw has spark but will not fire. yes there is gas in tank and i used starting fluid but no go.. Is the plug wet when you take it out ? Is the fire blue and a good arc across it ? I always dip

...spark plug or the coil aka=spark plug cable.But if your saw in lees the 2 yrs you need to follow the starting guide in order to avoid flooding. If you need more help come back.Post / thumbs / ...

...Husqvarna 345 chainsaw. I would like to know the resistance value between spark plug wire and blue wire from ignition coil, and between spark plug wire and the ground and finally resistance between ...

spark to the plug.On my Husqvarna 18 in. chain saw 235, e series. Try a new condenser. They are very cheap and can freeze which shorts it out inside so the magneto energy is not absorbed and ready for

...Husqvarna 350 chain saw after 20 minutes --- it quit (like someone had turned it off). It won't restart. 5 year old saw - used very little. What can I trouble shoot myself before taking to repair ...

kohler 18 hp command, only will go to 2000 rpms but no smoke and runs without any obvious noise 2 cylinder?? check both plugs have spark

spark plug gap on husky 350 chainsaw huskavarna 350 chainsaw spark plug gap The plug should gap at 0.5 mm or .020" and be sure to use the proper resister plug. Do not cross reference a plug.