hunter ceiling fan with light on the end of the light humming noise If this light is on a dimmer, that may be causing the humming. Try a higher quality light buld or one that is rated 130volts.
Hunter Fan problem I have a Hunter fan, with a remote. The remote has a p/n of 85094-01; I don't know the fan model number. The remote has pretty much quit working, although it will intermittenly turn
...Hunter Builder Select ceiling fan in the master bedroom that started humming. No matter what I did it still hummed so I replaced it with a Hunter Brookline. I had installed a Brookline in my 2nd ...
Question about 52" Ceiling Fan With Light And Remote Control
...enough force to do this. Soon enough, slow speed will make that noise and the fan will ultimately stop working. Have an electrician come in to look at it, if it is still under warranty, call
Question about 52" Ceiling Fan With Light And Remote Control
...Hunter brand fan and light kit Check all of your electrical connections, and ensure voltage is 120V to ground. If you have a dimmer switch replace with either a fan control switch or a simple on/off ...
Question about (25417) Ceiling Fan
HUNTER CEILING FAN SOUND LIKE THERE ARE BALL BEARINGS ROLLING INSIDE WHEN THE FAN IS ON. tHE FASTER THE SPEED THE MORE NOISE IT MAKES. The type noise is crucial in knowing the problem. Is it an ...
Question about 56 In. Florentine IV, Brushed Nickel Fan
...fan is going. The faster the speed the louder the noise. With light on only , no noise. My assumption is it is electrical. Any advice would be welcomed. Thanks, Todd. Unless it is really loud, the ...
Hunter Douglas fan humming noise Installed 4 of the same fan 2 years ago. The one makes a low annoying constant humming noise. It is not on a dimmer switch of remote. Has nothing to do with blades, ...
Question about 56 In. Florentine IV, Brushed Nickel Fan
how to get rid of the whining noise in a ceiling fan The fan hum's so loud it keeps me awake If you're using a dimmer control for the fan, get rid of it! Always use a fan control with 3-4 speeds.
Question about 56 In. Florentine IV, Brushed Nickel Fan
hunter fan #22441 makes clicking /rubbing noise,all speeds,blades are tight & and balance is good. what next??? 48 in.,4 bladed the plastic cover retainer screw above the blades .if the noise is there
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions