...humidity level. How do I get this to read correctly? It sounds as if the temperature sensor probe is touching the cold coil inside. The sensor is located in the incoming airflow, in front of the cold ...
...humidity level. I set the DH to 40% and left it on overnight closing all doors to the affected room and removing containers of water such as a vase of flowers. When I got up in the morning it had ...
...the unit will automatically start and run. Also, be sure that humidity extraction level is set on 32 - 35 %. Hope this helped you to troubleshoot and solve the problem. Please let me know.
...humidity extraction level is set to HIGH. Lower it to 32-35%. 2. Air intake filter is dirty or clogged. Turn unit OFF, & Unplug the Unit, before removing to inspect & clean it, if necessary. ...
humidity sensor. 1. The air intake filter is clogged and needs to be removed and cleaned. 2. The coiling coils need to be cleaned. 3. Ambient air temperature at floor level is between 40 - 60 degrees.
...humidity level rises above what you have it set on, the compressor will automatically turn ON and remove that moisture. Wants it's back to where you have its set, the compressor will turn OFF. ...
Question about BHD-501 Dehumidifier
...humidity level. Check the room conditions: The room conditions, including temperature and humidity, can affect the humidity level in the incubator. If the room is too dry, it can affect the humidity ...
Usually answered in minutes!
312 Questions
314 Questions
258 Questions
200 Questions
154 Questions