Questions & Answers for: hp printer leaving ink marks

Printer is leaving black ink marks all over paper. Only happens from one tray. What can be done? I ran a cleaning page through and tried to clean the rollers. Is there any way you can post an image of

...HP 4200 printer, the pages are coming out hot The papers are hot to touch when coming out of the printer. The ink is not smearing so I don't think it's a fuser issue. This only started happening ...

...printer for a CARRIAGE JAM. THe message says to open door, clear carriage jam and press OK to continue. I've followed the HP steps and no luck. Can anyone help? Hi and welcome to FixYa, If you have ...

...HP Photosmart D7260 Printer, I get "out of paper" error, paper tray full, feed rollers leave skid marks on paper" I have tried other paper (HP Premium Ink Jet paper, Avery namecard stock, HP Premium ...

hp 5510 all in one is showing a "no fax" message on all incoming faxes. I know the out going faxes are going thru, I checked. I don't know what the problem could be. I'm not getting any error messages

printer leaving ink marks on paper My expert opinon this printer needs to be cleaned inside, A stroung maintaince will do such as a cleaning kit, cleaning rollers and feeder and what not if that does ...

...printer is printing double images and leaving dark ink marks on the paper double printing or ghost images are usually cause by a fuser that is operating below normal temperature. the temperature is ...

...printer, so buying an HP original cartridge probably won't help. I've tried two different 3rd-party brands, and none of them work. Help??? I guess you should try to reset it ..and get the ...

...printer, then back on. When I do this it still won't print and that failure message shows up again By the way ..if it still makes the same issues..try to reset it ..specially if you used refilled ...

HP wide format have a wide format that is leaving drag marks on the page, replaced all the print heads changed paper type and the paper with no resolution, updated firmware and driver software changed