Questions & Answers for: hp deskjet 6980 change cartridge

HP Deskjet 6980 I purchased a HP Deskjet 6980 in Europe and have moved to the US. How do I change the region code of my printer so that US purchased cartridges will work? start with a fresh set of US ...

hp deskjet 6980 cartridge status lights blinking The Print Cartridge Status Lights did not stop blinking after I changed to new ones a couple of days ago. Now, I can't print neither from my computer ...

HP Deskjet 6980 HP Deskjet 6980 How to replace the black ink cartridge. Lift the cover up. The ink jet carriage should park in the center of the carriage. Gently lift on the front of the ink jet until

HP deskjet 6980. I don't remember how. Here is a step-by-step tutorial on how to change the cartridges: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00569593&lc=en&dlc=en&cc=us&lang=en&product

...deskjet 6980, door does not securely close on the right hand side, so therefore it will not print..what could be the problem? have checked everything,nothing binding it. This isn't technical at all, ...

HP 6980 PRINTER orange cartridge keeps flashing after cartridge change,even if the old cartridge is now put back.A computer check states the printer is ok.the info on screen says 'user intervention is

...HP Deskjet 6980 printer. cant seem to change it in the ink cartridge position. do I have to bring the mechanism along to the middle of the printer - if so how. Managed to figure it out for myself ...

...HP deskjet 6980 printer. Whenever I print a word document it will have sporadic fading. It will be fine in one place then all faded in another. I've cleaned the cartridges and even put a new one in, ...

HP Deskjet 6980. After changing the black ink cartridge i tried to print. The printer takes the paper but doesnt print, just the Power and the resume lights are blinking. If I press the resume button,

HP Deskjet 6980. After changing the black ink cartridge i tried to print. The printer takes the paper but doesnt print, just the Power and the resume lights are blinking. If I press the resume button,