...HP Photosmart C7280 and am going thru initial set up. Have got to the stage where insert paper which should then run trial page before i then move onto the wi fi set up Unfortunately the page hasnt ...
C7280 lights flash with the printer turned off. Also printer will hang on start up and always says it was turned off improperly when it wasnt hardware failure,Go for a new unit
hp c7280, light on panel flash and error code B851FE84 appears on printer screen Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English).
...HP Photosmart C7280. The printer will not turn on. Every time I try a blue screen comes up on the display and then all of the lights start flashing. 1. unplugged the power cord for 20 seconds ...
...flashing on op panel and code 00729c98 Remove it from the surge protector and plug it directly into the wall. This may prevent a problem that when the printer goes into standby, the surge protector ...
...HP 7280 has been turned off a few hours all lights start flashing. Pulling the plug and then putting it back solves the problem. I think there's an easier way to fix that, The printer might just be ...
...have to obtain firmware and/or software updates from HP on your specific printer. You may also have to check with your OS vendor to make sure you have all the updates/service packs on your PC or ...
Question about Photosmart C7280 All-in-One Printer
I keep getting, B03771E2 and most of the lights are flashing HPPhotosmartC7280all in one. www8.hp.com/us/en/support.html
Question about Photosmart C7280 All-in-One Printer
flashing and BO3771E2 is on the display window power it off, take cord out and any power supply to the printer, wait about 10 seconds to plug all power back in, make sure there is paper in the printer
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions