hp 9800 print alignnment I can't run though a complete precision print alighnment. When the test pages print, the numbers at the side and bottom of the page are completely missing - I do not know what
printer queue is blocked i have a project in the print queue that i cant get rid of and it is blocking the rest of the queue. i have tried cancelling the project, restarting my computer, shutting down
...hp deskjet 9800 push both "power on" and "resume" button? thanks This happened to me and it was such a simple fix, I forgot to pull off the tab at the bottom of the cartridge. I hope this is your ...
HP Deskjet 9800 I moved the printer from one area of our RV to another, plugged it in, all was well except suddenly my laptop didn't recognize the device. In the interim, my husband started the engine
...this problem the printer lights are blinking it is a catridge problem please use orginal priter Hp catridge or use any other catridge. i hope you will solve ur ...
The cartridges are new and after every print request an error message comes up that says "The Tri-color print cartridge has been previously used" then teh main message says "The ink level indicator ...
Paper feed button flashing Paper feed button keeps flashing--when you press the feed button, one blank page feeds through and the button begins flashing again. I have tried pressing the button ...
Printer is omitting the yellow ink from the image. Tried putting in new ink cartridge...would not print at all. Put back old cartridge, prints but without yellow ink. you need to see if you have a ...
Question about Deskjet 6988 Inkjet Printer - Color - 4800 x 1200 dpi - USB, PictBridge -
HP Deskjet 6800/6900/9800] http://inkjet411.com/?page_id=1741 (refer to 2nd video to understand how to read the printed pattern) 1. With printer power on, press and hold the POWER button. 2. Press the
Question about Deskjet 6988 Inkjet Printer - Color - 4800 x 1200 dpi - USB, PictBridge -
...hp deskjet 9800? Steps to reset HP Printer: ·Switch off the printer and disconnect the power cable ·Remove all USB Cables ·Press the power button for 20 sec ·Remove the power cord or unplug it from ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions