Questions & Answers for: remove stripped wheel nut

Question about 2003 Sentra

1 Answer

...remove it). You will need a vise to press out the stripped stud. Use a socket that's a little larger than the stripped stud so the vise will press it out as you tighten it. To press in your new stud, ...

Ad

...STRIPPED LUG NUTS. HOW DO I REMOVE THE WHEEL AND DRUM AS A UNIT. IS THERE A WAY TO WORK ON THE LUG NUTS TO REMOVE THEM MAYBE BY DRILLING THEM OUT. IT SEEMS LIKE THE LUG NUTS AND WHEEL HAVE BONDED ...

Ad

...remove bolt and loge nut from car wheel that is striped If you have a stripped lug nut on your vechicle, the best thing is to take the vehicle to a tire shop and have them remove the nut. You can ...

Question about 1996 Jetta

1 Answer

rear brake line: stripped 11mm nut that is attached to wheel cylinder, how do i remove the stripped nut to replace the wheel cylinder take vicegrip and pull it while you turn the nut

Question about 2007 Mustang GT California Special Convertible

2 Answers

...remove stripped stud and nut I've got a Ford mustang GT with 20 inch wheels on it, the right rear wheel is flat. I manage to remove the 4 four nuts perfectly but the 1 is stripped it rotates ...

Question about 2005 PT Cruiser

1 Answer

in the new stud from the rear of the hub.put a larger nut on top of stud ,then your wheel nut to pull the stud into the hub.then remove the wheel nut .then refit the parts taken off.and fit your wheel

...it. 3. Put in new one. done. Performance Tool makes a lug nut remover socket set thats designed to remove stripped or damaged lug nuts and locking lug nuts that the key has been misplaced or

...remove one of the two my 4 way cracked. I bought a package of special sockets for removing stripped lug nuts but all the socket did was spin on the stripped lug nut, so I put the next size smaller ...

...wheel on with out any problem do i need to replace new thuds or can i fix the old thuds? They will need to be replaced, Remove the studs easily with a good hit, Sml lump hammer works better than a ...

remove the wheel, remove the lower anti sway bar nut, position the bungee cord from the subframe to the brake rotor (This will support the brake assembly so you don't over extent the CV joint), remove

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...