Questions & Answers for: how to open jenn air oven after clean cycle

Jenn-air gas electric grill range After setting this range to the self-cleaning cycle, and running through it, we cannot get the oven door to open; it remains locked. This happened to us on ...

open? Jenn-Air Gas-Electric SVD48600. After self-cleaning cycle, the oven door won't open. It has been 8 hours since the end of cleaning cycle. any power to unit at all?? clear, start, clean ,button??

...Jenn-Air stove on the clean cycle and when it started to beep 1 hour into the cyle, I hit cancle. Now the stove is perminatly locked and I can't get it to open. It is not heating. I turned it off at ...

...Jenn air slide in older model after it is done cleaning the self clean cycle will run for 2-3 hrs and the door will remain locked for another couple hrs while cooling let it finish and wait till the ...

...oven. If you open thecontrol area, you can look at the sheet and know what failed by the list of fault codes. Unfortunetly, it could be the control board again (these are very fickle electronics), or ...

Jenn-Air, Kitchenaid, Litton, Maytag, Roper, Tappan, Thermador and Whirlpool) here. You can find links to helpful exploded view diagrams and part ordering help here. I recommend that you bookmark that

...oven door to open after cleaning cycle. Hi, Seems like you found out the hard way what I wrote about in this tip... Check it out it also contains some thing to try on how to unlock that oven.. Self ...

...open the oven until the LOC message disappears. Press the Clean Pad twice for a delayed start. Then use the Auto Start button to determine the delay for the cleaning cycle. The rest of the steps will ...

...clean cycle unplug it (or turn off the Circuit breaker) and let it sit for 2 hours and then try to open the door by pressing the stop/cancel button for more than 3 seconds. IF this does not work just ...