hotpoint wma 50 flashing pre-wash PLEASE COULD YOU HELP. I PUT THE MACHINE ON AS NORMAL, RUNS FOR ABOUT 5MIN THEN PRE-WASH LIGHT STARTS TO FLASH AND THE WASH HAS STOP WITH THE WATER STILL IN MACHINE. ...
door locked indicator light flashing door locked firmly indicator light keeps flashing when start button is pressed reposition the switch.. in the door first try holding button at door with finger and
wash light flashing have you accidently changed the program during a wash cycle.i had that happen earlier.
...hotpoint washing machine (model wma50) will not start due to the door lock light flashing yet the door is closed common problem on these machine's, you need a new door handle which comes as a full ...
flashing pre-wash approx 1 hour into wash cycle instead of moving onto rinse and wash. Whats causing this? This is happening on the WMA50. Hi! If the pre-wash light flashes it means you are not ...
...hotpoint WMA50 and was working fine until we had a combi boiler fitted. I connected it as advised with a 'Y' for cold fill but the 'pre wash' light flashes and I have to manually ...
Hotpoint WMA50, started on regular wash cycle, emptied water, but instead of spinning, all LED lights begin to cycle. i.e. flash from top to bottom and back again!? Any ideas. Hi there, I'm ...
Question about WMA50 Front Load Washer
lights were flashing above the control switc 'Machine starts the wash sequence by filling with water but the drum fails to rotate at all though its perfectly free to move by hand, at one point all
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions