Questions & Answers for: hotpoint wma30

Ad

Question about WMA30 Front Load Washer

1 Answer

hotpoint aquarius wma30 drum wont turn If it has filled with water, and no lights flashing, and then no motor action I would check the brushes in the motor for wear. Remove rear panel , remove belt, ...

Ad

Question about WMA30 Front Load Washer

1 Answer

hotpoint fault? hotpoint Aquarius Extra wma 35 1000 fault? i have a hotpoint washing machine , I put a wash on which when cycle was complete washing was still very wet. Check the drain and circulation

Ad

Question about WMA30 Front Load Washer

1 Answer

hotpoint WMA30 does not beep on any program as there is no 'beeper' on the pcb. The 'end' led illuminates when it finishes on any program. The most common cause of no rinse or spin is a blocked filter

Question about WMA30 Front Load Washer

2 Answers

how do i change the brushes on my wma35 hotpoint washing machine so that it'll spin? unplug first then remove top cover motor should be there remove motor 2 bolts then u can change brushes how do you ...

Question about WMA30 Front Load Washer

1 Answer

I HAVE A CREDA WASHING MACHINE WMA30 IT DOES I HAVE A CREDA WASHING MACHINE WMA30 IT DOES NOT HEAT WATER I CHECKED OUT HEATER CONNECTION AND RESISTANCE OF HEATER IS FINE I NEED THE SERVICE MANUAL ...

Question about WMA30 Front Load Washer

1 Answer

...L on a Hotpoint WMA30 is for hand wash items. If you need a user hand book for this model use this link and go to 'user manuals' or if you need a worksop manual for the WMA or WM range use these ...

Question about WMA30 Front Load Washer

1 Answer

hotpoint wma30. Drum not draining water. Have hotpoint wma30. Drum not draining water. Have been able to drain drum when outlet pipe lower then drum only. tried again but no drain & all lights on ...

Question about WMA30 Front Load Washer

1 Answer

Hotpoint WMA30 is leaking a small amount of oily water from the back of the drum when in use. There is a small hole in the back of the drum, should there be a screw in this hole that has fallen out? ...

Question about WMA30 Front Load Washer

1 Answer

hotpoint WMA30, when i set the programme the door locked keeps flashing and the machine wont start, ive replaced the interlock switch but its still flashing nudge it with your knee! have same problem,

hotpoint aquarious wma30 making loud grinding nosies and sometimes won't start Have you been able to get in contact with the manufacturer?

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...