Questions & Answers for: hotpoint wd420 start button

...hotpoint washer dryer wd420 when the cycle starts after a few seconds the on/off button and the rinse hold lights flash and the machine stops. most components have been checked but cant find the ...

hotpoint wd420 washer dryer door won't open. i had a wash on when the power cut out. i turned the power back on and finished the cycle but since then the door will not open. the light says door locked

Water now not going into the Washing Machine My wash cycle started and water did go in but not enough for a full wash - the wash button now keeps flashing. I've turned it all off and tried the cycle ...

drum doesn't really rotate on wash cycle. on wash cycle, loads water then tries to rotate drum - but only rotates about 3'' at the bottom of drum, takes under a second, stops, then tries to rotate ...

how to reset wd420 1200 spin press and hold the start/reset button until all lights come on about 20 secs

...Hotpoint WD420 Hi, I have just had a powercut and although everything else in the house is back to normal my washing machine is not! It was mid-cycle during the powercut and has water in it. The ...

...HotPoint Aquarius washing machine WD420. When I switch it on,all the lights on the panel jst flash on and off continiously and nothing else happens. If you have not already done so press the start/ ...

Ref WD420, select program, press start button, all lights on top panel come on then go out and nothing happens **** the red wire n tape it to thw white one

All lights flashing and can't use the start button. This could indicate a faulty door interlock switch, Cost of parts around £20......Simple to fit...

...button. Has the machine stopped working with the START light flashing and the time saver light on? If so, this is an error code indicating a motor fault. Please describe any other lights that are on ...