washing machine which is a Hotpoint Ultima WMA76, and it will not start because the RED SAFE LIGHT has illuminated, have you any ideas. Which symbol is illuminated? Red keyhole? Child safety? Red tap?
...hotpoint washing machine is not working and you feel it needs repairs and you are getting the E10 or F10 error code, this means there is NO cold fill and you should check and verify that the taps are ...
Question about Aquarius WD640 Front Load Washer/Dryer
...red light shows a picture of a tap Hi, Please check if there is any block in the water outlet pipe. after cleaning the outlet pipe, you can switch off the machine for an hour or so. and then again ...
...washing machine This is indicating a problem with the water supply, check the inlet hose/s for a restriction or kink in the hose/s. Make sure the tap/s are fully turned on, and that there is a good ...
...hotpoint washing machine is not working and you feel it needs repairs and you are getting the E10 or F10 error code, this means there is NO cold fill and you should check and verify that the taps are ...
...hotpoint washing machine is not working and you feel it needs repairs and you are getting the E10 or F10 error code, this means there is NO cold fill and you should check and verify that the taps are ...
...hotpoint washing machine is not working and you feel it needs repairs and you are getting the E10 or F10 error code, this means there is NO cold fill and you should check and verify that the taps are ...
...red light is on that idicates that the water tab is turned off where actually is turned on. Any idea??? This normally means there is no water getting to the machine, the taps are usually at the rear ...
Question about Aquarius WF000 Front Load Washer
...Hotpoint WMA34? Can they get stuck shut through corrosion/lack of use? i have just plumbed in my WMA34 (1000 spin?), which has been stored, empty, for 3.5 yrs, the brains of the machine seem to work, ...
if i leave the washer taps,red/blue ones in the on position when the wash has finished the drum fills with clean water.so once the wash has finished i have to switch taps off to stop this problem.any ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions