Questions & Answers for: hotpoint electric oven auto clean

...PRE-HEAT LIGHT COMES ON AND GENERALLY THE OVEN GOES TO 350 AND HEATS UP. MY BROILER PART WORKS. ARE THERE PILOT LIGHTS OUT OR SOMETHING. how do I get my self cleaning to come on in my hotpoint ...

hotpoint double oven top oven and grill work fine bottom oven fan comes on but no heat and no indicator light on brand new appliance Top oven works bottom oven fan works but bottom oven does not work ...

hOTPOINT DOUBLE ELECTRIC OVEN model No UY46 Bottom oven not working fan only works cannot get rid of AUTO signal Hi, While it is flashing auto ,you will not get the oven to heat up. You must press the

Hotpoint BU62 display works but nothing else does. The light in the main oven stopped working about 4 days ago. Now the only thing that works is the display. If the display is flashing auto, then you ...

Hotpoint RB790SHSA Electric Kitchen Range with ceramic top. I went to turn on the interior oven light (the oven/stove was not on at the time) and there was a flash and a pop from under the front panel

...hotpoint oven and after i was done doing the self clean, i turned the dial to off position and unlocked the door, now i cannot use broiler or oven cause the auto clean light will not quit blinking. i ...

...hotpoint ew91 halogen double oven, after power cut clock is flashing 0.00 auto how can i reset clock as the main oven will not work either at the moment. Hi, Just to let you know that i have solved ...

...hotpoint stove the self cleaning light flashes when I try to turn my oven on the bake in it. Hi, Seems like you found out the hard way what I wrote about in this tip... Check it out it also contains ...

...oven door latch all of the way to the left after the clean cycle. If the latch is still positioned to the right in the locked position then the CLEAN light will continue to blink. If the door latch ...

When I turn on my Hotpoint oven the Auto Self Clean light begins blinking and will not heat up. The oven is clean. Why? If the off button doesn’t respond and cut it off, replace control / clock.