Questions & Answers for: hotpoint aquarius lint tray

...lint tray/filter is blocked or the motor is malfunctioning. Lets assume it is the former! REMOVE ALL POWER FROM THE MACHINE AND HAVE A WATER RECEPTACLE AND/OR RAGS TO SOAK UP THE WATER! Normally the ...

...lint tray/filter- it could be blocked. It is normally found in most machines behind the lower front cover. REMOVE POWER FROM THE MACHINE AND HAVE A WATER RECEPTACLE AND /OR RAGS AT CLOSE HAND! The ...

Hotpoint aquarius wf100 has filled with water and wont drain. how do I drain water out of machine so can check filter etc?? Thanks Hi from retired Englishman in SW France, Following is my 'standard' ...

hotpoint AQUARIUS WFOOO 1000spin washing machine Hi from retired Englishman in SW France, Here are my general guidance notes for checking filters and motors which I hope should help ;-0) -------------

...Hotpoint Aquarius WML520 will not pump out water or get past the wash stage when on the Baby Cycle or any cycle with the Super Wash. The appliance is only a week old. Hi from retired Englishman in SW ...

Hotpoint Aquarius WF210 FRont Loader Washer The machine will not empty and not able to open the door. Hi from retired Englishman in SW France, I would gently suggest as a first step that you clean the

Hotpoint Aquarius WDL520 Wash and Dry does not finish the cycle most of the time so it needs to be restarted. All lights then start flashing orange. Hi from retired Englishman in SW France, Probably a

...hotpoint aquarius wma34 the door keeps on flashing and wont start help thank u Hi from retired Englishman in SW France, I would gently suggest as a first step that you clean the drain motor/pump lint ...

Hotpoint Aquarius is full of water and clothes and door is locked. Is there anything I can press-button wise to make it empty please? Hi from retired Englishman in SW France, It is unable to drain and

...hotpoint aquarius Hi from retired Englishman in SW France, From your desciption I would gently suggest as a first step that you clean the drain motor/pump lint tray/filter- so many 'faults' ...