Questions & Answers for: hot heater resistor

...heater core) because it becomes hot and would melt if it wouldn't be constantly air cooled. You can consult this link http://www.automotiveforums.com/vbulletin/showthread.php?t=665246 for replacement ...

...the resistor. It will burn out. Air flow in the heater box cools the resistor. These resistors get very hot when the blower is running. The A/C 's heater works but the A/C doesn't gives cold ...

...at heater core are hot wouold resistor be part of the problem The resistor only controls the lower speeds of the heater electric motor. If you have only the high speed that works, the resistor is

...heater motor and put a hot wire to it to check the motor if it blows if the wire gets real hot you need to change the heater blower motor. You will probably need to change the heater fan motor ...

hot when the car is running and the heater fan is on high. what to do next? Check fuse check power before resistor if there power to resistor and none at the blower motor connector the resistor is bad

...wire should be hot with the switch on LOW.If any of these are not as stated above, then you either have a bad A/C - heater control unit, or faulty wiring between the control unit and the

...hot before inserting the resistor pack to its position? and why are no. 2&4 speed not working? u have a faulty heater resistor, very common fault on these. unfortunately its not a simple case of ...

...hot and it is usually the practice to bury the resistor in the cool air intake of the heater unit to help prevent them overheating. Because it isn't unusual for heater motors to seize which ...

...hot, so they are placed onto the heater case where air inside the case will blow by the resistor pack and help cool it. The resistor pack is the last part of the wiring to the blower motor. You have ...

Suzuki alto sz4 heater resistor location Heater resistor gets hot and so is placed at the point of greatest cool air flow in the heater unit - this is generally just before the fan.