Questions & Answers for: hose dyson working

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

4 Answers

...hose of the Dyson when the sound of the machine got much louder and the hose lost suction. While investigating, I have noticed that on the back along the bottom to the right of the hose inlet, there ...

Ad

Question about DC14 All floors Bagless Upright Cyclonic Vacuum

1 Answer

Dyson DC14 hose attachment I just bought a dyson DC14 All Floors. It was a floor model, so it didn't have the manual. I looked at the manual on-line, but it wasn't any help. So, my question is... How ...

Ad

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...hose Dyson Animal works fine with the base unit but as soon as you put it upright it draws too strong of a suction. It's hard to even pull the attachment hose out and the hose collapses immediately. ...

Question about DC14 All floors Bagless Upright Cyclonic Vacuum

1 Answer

...hose i have my dyson dc07 wont work using the hose, i have replaced the hose as it was ripped and have cleaned everything but it still has no suction and makes a horrendous noise when upright. theres ...

Question about DC17 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...hose to check this for any splits or blockages. If it needs to be replaced, you can buy a replacement online at www.dyson.com. Alternatively, should you any further help or advice with your Dyson, ...

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...Dyson DC07. Works good but the 17 foot extension hose doesn't seem to be picking up or have any suction. What could be the problem? Hi its Darran at Dyson. From your description of the problem, it ...

Question about Ball DC24 Bagless Upright Vacuum

2 Answers

...hose on dyson dc24 dyson dc24 works normally but when we try to use the hose which has never been used there is no suction Hi its Darran at Dyson. It sounds as though the hose is blocked. I would ...

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

1 Answer

...hose does not work? Hi its Darran at Dyson. From your description, it sounds as though the hose or wand is blocked. Follow the blockage procedure in the user guide or in the Support section on our ...

...hose of my Dyson is not working - have cleaned all parts, main part of vacuum works Your changeover valve arm is more then likely broken or cracked. If so you will have to change out your under ...

...dyson-machine/removing-blockages-from-the-wand-and-hose I'm sure this will get your machine up and running again. But if you would like any further help or advice from our experts in future, you're ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...