Question about SteamVac F5914-900 SpinScrub Upright Vacuum
...Hoover Steam vac Heated carpet cleaner Brushes stopped spinning and suction of water stopped in the middle of cleaning caarpet. This happens when the filter on the inside of the lid for the dirty ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
hoover steam vac dual model F7425900 I have a hoover steam cleaner that the wheel do not rotate If you are talking about the brush block, take it out and see if the shaft that goes up into the turbine
...Hoover steam-vac upright http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564960 Generic problem for all Vacuums Brushes do not rotate on posted by marshad on May 02, 2008 brushes do not ...
...attached to machine does not rotate If this is a Hoover Steam vac, the turbine which drives the brushes is bad. If not a Hoover, then what is it, they are different, need brand and model
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Hoover Steam VAc carpet Model F7425-900 Brushes will not rotate. They seem restricted because they only be rotated by hand 1/3 of a turn. either way Take out the brush block, make sure that the shaft ...
Question about SteamVac Carpet/Upholstery Deep Cleaner Vacuum
hoover steam vac, brushes won't rotate, have cleaned filter by brushes, removed brushes and they rotate okay when off steam vac, tried to ajust level for carpet cleaning and brushes still don't move ...
Question about Steam Vac Dual V w/ SpinScrub Vacuum
Hoover Steam Vac Dual My 2 year old Hoover Steam Dual Vac Model # F7425-900 do not rotate. I have cleaned out the lint trap at the bottom of the machine as recommended. Any suggestions and if so where
the scrub brushes wont rotate clean it should be hair struck
Question about F6213-900 SteamVac Agility TurboPOWER Steam Vacuum Vacuum
I have a hoover steam vac dual v. The brushes will not rotate The brushe holder is not snapped in correctly. You have to push it in hard.
Question about Steam Vac Dual V w/ SpinScrub Vacuum
...hoover steam vac is making a horrible noise and smells like its burning Something may have jammed the brush roller, preventing rotation. This causes the motor shaft to rotate in one spot on the belt, ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions