...trigger will not retract valve. Water just runs out. Little white tip of valve comes out of housing. I the valve all one piece? Sounds like you need to replace the handle valve pieces, if they are ...
Hoover SteamVac Is there a spring in the trigger. The valve was is two pieces and we glued it together and it still won't retract. Is it possible there was a spring in the trigger that got lost or do ...
Hoover steam vac silver the trigger that operates the shampoo to the carpet does not work. I have unscrewed the cover and found that the trigger is loose. Help...will this be an expensive repair? ...
hoover steam carpet cleaner the water and soap will not dispense out to clean carpet. What do I do? does the trigger feel like it is doing anything? if not you may find that your handle lever guard is
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
Trigger on hose attachment not working so water sprays constantly The trigger doesn't seem to have much motion to it, unllike the trigger on the handle for regular floor operation. For that, it is ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
...hoover steam vac is losing all the cleaner and water out of tank the trigger isn't stuck You will need a resevoir. This is the valve that the solution tank sits on when put on the machine. If your ...
Question about SteamVac F5914-900 SpinScrub Upright Vacuum
...Hoover SteamVac F5914-900 SpinScrub... The last time I used the hand tool attachment, it worked fine. Just tried to use it again, and now I only drips of water will come out of the hand sprayer, if ...
Question about Steam Vac Dual V w/ SpinScrub Vacuum
trigger. I crazy glued it back to how it should be and closed up the unit. It worked fine and kept on working without problems. You must also check that nothing is clogged anywhere. or that a belt may
Question about SteamVac Spinscrub 50 Carpet Cleaner
...Hoover spin scrub 50 solution trigger? It is not working. When I pull the trigger, it doesn't feel like it is attached to anything. It is not dispensing the cleaning solution. Hey there! Sounds like ...
Question about H3040 FloorMate SpinScrub Widepath Remanufactured H30
...trigger takes a lot of strength to squeeze. The plunger rod is immobile. Hi Melissa, this is one of our older designs that we recommend you take to a service center to get checked out. Find one here: ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions