Questions & Answers for: hoover f5914 hose attached leaks

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

...leaks at this point. unit worked for about 5 minutes on apholstery make sure everything is filled and secured tightly, if this a new unit it should be something simple ok, also check where machine ...

Ad

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

...F5914 has a hose that must be attached to the pump when using the upholstry attachment. Make sure that the solution hose is pushed onto the pump valve all the way. Try pushing the hose down and then ...

Ad

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

2 Answers

...hose appears to be O.K. Hoover SteamVac Ultra (model F5883-900) Threw it away, and had to buy a new machine. Sorry, but I found it more difficult to deal with the housing unit on the machine and just ...

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

...Hoover spin scrub hose attachment to clean a spot on the floor. When I went to go back to use the vacuum the water tank was empty. I know there was some water left in that tank when I last used it. I ...

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

3 Answers

Hoover Steam Vac is leaking or water will not come out of the attachment hose, then this is the part that you probably need !!! This part is for F5914-900 model. Hope this helps I had the same problem

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

...the problem: "If your Hoover Steam Vac is leaking or water will not come out of the attachment hose, then this is the part that you probably need !!! This part is for F5914-900 model. Hope this ...

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

3 Answers

...hoover, no less!) I had the cleaner on a tile floor trying to use the hand attachment on the sofa, and I noticed the puddle. When I put the cleaner on a carpet, it seemed to work fine. Not sure if it ...

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

...F5914-950 new; worked correctly first time, second time trouble It may be necessary to remove air from the system (?prime the pump?) so the clean solution will flow to the tool properly. Follow these ...

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

hose on a Hoover SteamVac F5866-900? i There, I'll be happy to walk you through step by step how you can attach the hose to your Hoover SteamVac. Here are step by step instructions for you: Step 1. To

Question about SteamVac F5914-900 SpinScrub Upright Vacuum

1 Answer

When trying to scrub rug, the cleaning fluid runs out but the scrubber will not **** it back up. My rug is soaked! You have an air leak. This is almost always caused by the lid not being correctly ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...