Questions & Answers for: hood cable frozen

...cable itself. sometimes this will work.If you can see the latch mechanism from either beneath the edge of the hood or from underneath, use the stiff wire to pull on the bare part of the latch

...and Cable 3 16700 Hood Latch 4 N802850-S55 Screw and Washer Assy (2 Req'd) 5 387514-S2 Screw 6 ? Existing Locator Pin (2 Req'd) A ? Tighten to 9-14 Nm (44-70 Lb-In) B ? Tighten to 2-3 Nm (18-27

hood release cable is frozen, how to unlatch hood? hood release cable is frozen, how to unlatch the hood without it? if you can get a pry bar or a screwdiver under the hood and push on the mechanism ...

...cable moving but not unlatch the hood Get someone to press down the hood while you pull the lever should open when opened adjust the cable and grease the catch. It may be frozen/stretched out or ...

...The handle for your hood release has a cable behind it. Pull the cable off of the handle and use pliers to pull on it. If the hood opens, you need a new cable. If it doesnt, u need a new

...hood latch won't open.cable frozen ? frozen or broken. try a good whack on front on hood while someone pulls latch, see if you can free it up. no luck? try pounding at driver's side near the ...

...cable linking the hood latch to the hood release lever froze up and just needed replacement. My hood release lever on the inside of my Jeep felt loose when I tried pulling it. If your hood release ...

the hood latch cable will not release the hood it frozen Park in warm garage, thaw, open hood and lube cable using a motorcycle cable lube tool. Ask at auto parts store.

...hood cable broke. With a flashlight, you will have to lay under car and reach up where cable runs into latch and pull the latch mechanism/lever to unlatch hood. If not comfortable doing this call a ...

...hood open. The cable works, but the safety latch under the hood is either seized or frozen. How do I release it? Try applying penetrating oil (WD 40) to the latch. Have somebody pull the cable open ...