Questions & Answers for: honda ride valve adjustments

Question about 2002 VT 1100 C2 Shadow Sabre

2 Answers

ride on freeway My 2002 Honda Shadow Sabre sometimes gets a lifter tick after a hard ride on the freeway doing 70-80mph. Usually on hot days. Sometimes it goes away and soemtimes it hangs around for a

Ad

Question about 1997 VT 1100 C Shadow Spirit

1 Answer

...up more than likely its the valve you are hearing. If your valve need adjusting and you continue to ride it you have a greater chance of burning the valve out or floating a valve at higher

Ad

...ride around it runs ok and then it dies out of no where or when i stop my right side of my header glows red Stalling, won't idle, and glowing header pipes are all symptoms of two possible problems: ...

Question about 1998 VTR 1000 F Firestorm

1 Answer

...& adjusted, otherwise its a burnt-out or bend valve or somehow the ignition timing has moved (unlikely) Good Luck Hope this helps. (If it does then please mark this as 'useful') Ride Safe ...

Question about 2005 CRF 450 R

2 Answers

hello i got my valves adjusted about 3 rides ago which is probably 6-8 hrs. I am having problems starting it. Do i need to get them adjusted again? No you shouldn't have to get them adjusted that ...

Question about 2005 CRF 450 R

1 Answer

...honda 350x 3wheeler My friends who ride ATCs always ask me questions about doing the valves. Everyone seems to be scared of doing their own valves. I suggest you buy a copy of the Honda 350x Service ...

Question about 2002 VT 750 CD Shadow A.C.E. Deluxe

1 Answer

honda shadow 750 Ace blowing smoke after idle or a ride but not when riding @ Hi, Maria your instrument gauges and lights can alert you to most electrical and engine issues they can not warn you about

Why is my Honda 125 VT Shadow making a fast clicking noise when riding?. There is no sound at idle, changed oil recently, Garage put on a new sprocket and chain few weeks back. Checked Oil, All Good. ...

...Honda ace deluxe 750 blows blue smoke out exhaust when warmed up could it be valve adjustment No that is either poor ring seal or loose valve guides, you need to rebuild the engine most likely. Hi, ...

...Honda XL125R. Hi, I need valve clearance specifications please. I think its 0.05 mm for both intake and exhaust. But I am still not sure. Question edited for clarity I use to ride a very modified ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...