Questions & Answers for: honda power washer pull starter

honda power washer probs... I am having a problem with the pull starter. It seems to be locked. I get nothing when I pull. Anything I can do?? theres a possibility that the engine is seized !! try ...

...Honda GX engine. 3 hours use each year, 8 years old. Normal maintenance. Engine seems fine. Pump oil level is OK. Engine starts and pump works fine for 10-20 minutes, then the water pressures stops ...

Power Washer will not start - pull cord seems to be stuck hi take out the bolts holding the compleat pull starter remove unit pull the cord if it wont move something is jamming it inside if it is ok ...

...Washer General points to check if a problem occurs Are the engine and fuel switches in the ?ON? position? When troubleshooting, always check oil and gas levels. The oil for the pump is a 30W ...

...power washer with the Honda GCV160 engine that I can't get to start. It was okay when I purchased it from Home Depot last spring but now I've tried putting new gas in it, spraying carb cleaner, new ...

...honda engine. I'm sure the briggs engine is good. I wouldn't buy a used machine... unless the price was low and it started on first pull. Electric starter on your power washer might be a ...

What PSI will the simpson Model WS5040H maintain while in use? I have had difficulty getting anywhere close to the rated PSI on a DeWalt 4200 PSI unit. Idle the pressure stays at about 4200 but as ...

...power washing and have several mechines with honda engines . And its always rebuild the water pumps the engines start first pull every time . I had to look at some of my manuals the mechine is likely ...

power washer too much oil with no spark plug, i have oil come out spark plug hole when i pull the starter cord Hi Martin, check the level of the oil in the engine, if the level is low, the machine has