Questions & Answers for: honda gx160 start

honda powered gx160 model pressure washer wont start how do i get my honda powered gx160 model pressure washer to start. i havent used it in about 2 years i recently took the plug out and cleaned it ...

Ad

Question about 8 HP Engine

1 Answer

Honda GX160 Valve Guide Displaced My Benassi mower uses a Honda GX160 engine which failed to start. I have traced it to a stuck exhaust valve and bent push rod. The valve guide has moved along the ...

Ad

...Honda GX160 5.5 HP OHV-Starts easily but... Pressure washer with Honda GX160 5.5 HP OHV-Starts easily and idles fine but when load is applied(i.e. start to pressure wash or move to full ...

Question about Horizontal Engine 5.5 HP OHV 12V ES 3 Amp 3/4 x 2-7/16 GX160-QXE2

2 Answers

...honda 5.5 gx160 generator wont start It was all fine on friday. ran no probs today just wont start full with fuel. Is the ignition switch turned to "ON"  . Is it full of oil? The engine can not ...

why does my honda gx160 start and run for minute or two then cut off. Will restart wacker compacker Hi, check the oil level. If low the oil guardian is cutting the spark. Regards Phil.

honda gx 160 runs for 30 minutes then shuts off and wont re-start Try checking the fuel filter and or line. Sometimes dirt is drawn in to plug the line, then settles back down later.

Question about 5.5hp 6:1 Gear Ratio GX160 Engine

1 Answer

honda GX160 starts runs dies runs fine for one minute than dies starts first pull and repeats motor hase been cleaned thourghly How about the carb was it cleaned ???? It's definitely a fuel issue

GX160 pull start spring broken how do I get the bolt loose?? have tried to get the bolt loose to repair spring will not budge. Is it normal threads or left hand? Unscrew clock wise.in reverse to ...

honda gx160 qh26 wont start, backfires thorugh exhst, new plug, re&re carb,valves in. .006 ex. .008 , sos please everything seems ok, push rods straight, valves move freely, pull start, backfires ...

...honda gx160 driving a generator. Engine starts OK but when any load is put onto generator engine splutters then stops. Display says low engine power. Any ideas? check oil level .low oil causes vacuum ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...