Questions & Answers for: homelite trim edge

...Trim N' Edge 25cc trimmer and the flexible curved shaft snapped at the housing end. I can get the flexible shaft out by removing the saft from the engine, but I can't figure out how to remove the ...

...Homelite Trim n Edge Zip Start. The number I found on the machine was UT20779. I'd appreciate good help. I don't want to mess the machine up putting the wrong stuff in, but, I want to get this done. ...

...Homelite Edge/Treamer and were can I find the online manual - UT20930 50:1 mixture. Trimlite, Trim 'n Edge, and EasyReach models. Pre-mix unleaded gasoline and 2-cycle engine oil in a clean 1 gallon ...

...Homelite Mighty Lite 26ss grass trimmer? I don't have a manual and I can't figure it out. Thank you! cut a 6 ft piece and wind it (starting with the middle of the trim line) around the head with each ...

Homelite "zip start" trim n edge string trimmer. What fuel mixture is recommended for it? Modern Homelite equipment uses a 50;1 fuel mixture. That is 2.6 ounces of 2 cycle mix to 1 gallon (U

...homelite UT20772 trim n edge the flex shaft broke--How do I remove it (the broken end ) from inside the housing/ Unbolt the torx scews that hold the flex drive tube to the front engine cover. ...

HOMELITE TRIM N' EDGE/ 25CC (MODEL UT 20779) - SAT IDLE FOR 2-3 YEARS -WORKED FINE WHEN STORED. REPLACED FUEL LINES & FUEL FILTER, PUT FRESH GAS & OIL MIXTURE (50:1). WILL NOT START - ...

...homelite trim n edge model # ut20024b will stay running only with the choke on half...i have checked and changed the fuel and replaced the air filter, bulb, and fuel lines. Your carb is clogged with ...

...Homelite trim n edge whipper snipper model number UT-20805 The primer bulb is broken and as I don't have the manual I am not sure what size replacement to order Any suggestions would be much ...