Hobart LXIH displays P2 My dish machine displays a wrench and the code P2, what does this mean? The rinse thermistor is bad,look on the back of the machine to the right and you will see 2 black wires ...
Question about 24 in. LXIH-3 Built-in Dishwasher
Hobart LX 30 P2 Error and unit overflowing! My Hobart displays a wrench and the P2 error code. Then last night it just over flowed all over my floor. I shut it down and turned it back on and it did ...
...Hobart Are you sure the code isnt p2?This is the rinse thermistor that is in the top right corner in the back,it screws into the vac breaker assy.Part number 328994 from hobart about 60 bucks.Let me ...
Question about 24 in. LXIH-3 Built-in Dishwasher
...hobart 00-329274 tank probe open,shorted.or dirty /p2 P2 WRENCK HOW TO CHECK ?? The rinse thermistor is bad,on the right side in the back you will see 2 black wires connected to a white plug that ...
hobart lx 40 - problem D 1 My machine stops after starting and wash cycle and flashes ''Problem'' '' D 1'' Does it show a wrench icon and P1? error codes are p 1to 3 for probe errors, or E1 to 7 for ...
Question about 24 in. LXIH-3 Built-in Dishwasher
...p2 code is your rinse thermistor is bad,if you gain access in the back on the top right side you will see a probe with 2 wires going into the rinse piping.Use a 7/16 wrench and unscrew.Very easy to ...
Question about 24 in. LXIH-3 Built-in Dishwasher
HOBART LX30H - P2 ERROR CODE? WON'T DRAIN COMPLETELY - HELP PLEASE the p2 err. is on open or shorted rinse thermistor which is located on the back of the mach next to the vac. brkr. as for draining ck
Question about Undercounter Dishwasher, Hot Water Sanitation, Fresh Water Rinse, Delime Notification-LXIH-4
after replaceing my rinse probe i'm still getting the P2 error code how do i clear the code. that is the case and need to look into control PCB.
Question about 24 in. LXIH-3 Built-in Dishwasher
hobart lxih found leaky hoses, and replaced those. Now soon as I turn on the water supply on with the dishwasher in an off position, water continually fills and eventually overflows the tub. Error ...
trouble code P2 How to fix or clear code? It seems that the rinse probe thermistor open or shorted.
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions