Questions & Answers for: hitachi tv control board

Hitachi TV, and when he turns it on, the blue "warm up light" keeps flashing, and the screen stays dark. The Sears repair man said its a control board, and estimated $800 + labor?! A local shop quoted

...Hitachi LCD TV does not turn on I have an Hitachi 26" LCD TV, model26LD6600 that is not turning on. When you switch the TV on, the red light at the front does come on but when you press the button on ...

fail are the PSU, controller board, low buffer and sustain boards. If the TV is only 13 months old, then it is worth calling Hitachi and asking for a warranty extension or a discounted repair. Regards

Hitachi CLU-5713TSI remote control won't work anymore. Acts like it needs to be programmed again. Press tv button, light comes on then fav channels and snow comes on tv. Can't access anything Take off

Hitachi 50" hd TV displaying black lines on screen 50" Hitach hd tv - 2 years old with HDMI cable attached to a FIOS DVR. Intermittently diplays black lines across screen from bottom up to about half ...

Hitachi 55HDX62 no picture but has sound the standby light is red until i turn it on then it goes green and the tv turns on with audio only Back-light problem. Check and replace damaged component/s at

...hitachi 50" colour tv 50HYT62U, purchased about 2 years ago. Has started switching on and off in a loop when I plug it in. Remote control won't work. Main digital board fault. Check and replace it. ...

Hitachi 55" LE55A6R9 TV has no picture but has sound. I can see with a flashlight a image. What part do I need? You need the Ballast board that controls the white backlights. You can get one from here

...hitachi lcd 65 inch replaced main and power board and words on screen are jagged for example scores during games letters are jagged Most likely your Tv has a bad Timing controller board or the ribbon ...

...wave appear on my Hitachi TV. The power signal light turns bright red when this is happening. I have no control of the TV when this happens. Eventually it will fix. I'd try replacing the main ...